5535-M18

5535-M18 came to hand on 2003.02.05.
I want to tell the details here.

  Condition
  Configuration of KDOS

  Please look at pictures, although there is what has inadequate exposure.
  Please have a look about a pictures here.

5535 image
This is in the state where the power on.

There is an impression which takes a
place considerably.
I think that the desktop which does not
take a space too, is right.
5535,98LT,TP340 image
This is comparison of a size.
The machine which comes out later is
considered, or it becomes and is large.

It is ordinary size if it sees as "laptop".

From a top
IBM ThinkPad340 (Just A4 size)
NEC PC-98LT (A4 file size)
5535-M18
5535 keyboard image
This is a keyboard.

It is the impression of changing the
arrangement of the key of type1
keyboard and having pushed in.
5535 slot image
This is near an expansion slot.

5250 Adapter/LT is contained in the slot.
The bottom of it is a serial port and
switches.
The function of a DIP switch is not known
though regrettable.
The right-hand side is a TEST switch.
And it is the lamp in which a TEST state
is shown.
5250 adapter LT image
This is 5250 Adapter/LT.

Although it understands that I have you
compare with the adapter of the page
of the architecture, there is no switch of
an address.
It sets up on software.

Page Top



Condition
    It received by junk article treatment at a certain auction.
    A grade says but it does not become precocious.
    It seems that it has embezzled on business considerably.
    There is a portion which paint has peeled off considerably and a horizontal line
    goes into liquid crystal considerably.
    A keyboard also has the bad key of a reaction and a diskette drive causes a
    defect of operation occasionally.
    It may not be amusing whenever it may break ...

  Composition of hardware
CPU
 i80286 10MHz
Memory
 1MB (It checks by the system test)
Hard Disk
 20MB
Display
 Monochrome LCD with a back light
Adapter
 5250 Extended Work Station Adapter / LT


  Partition of Hard Disk
Partition1
 ICHITARO
 4MB
Partition2
 MS-DOS K3.42
 16MB

    It has divided into two partitions.
    The started partition becomes C drive and another partition becomes D drive.
    Except for the case where the kind of OS to start is different, I think it quite new
    that a drive letter changes at the time of starting.


  Software already set up
OS
 KDOS Ver3.43 (for 5535)
Kana Kanji conversion
 Partition1  ATOK6
Partition2  MKK (Clause conversion)
Application
 ICHITARO Ver3.1
Emulator
 5250 Japanese Personal Computer
Development language
 IBM COBOL/2

    5250PCs have not been started in an error.

Page Top



Configuration of KDOS
     CONFIG.SYS of Partition1
        1 BUFFERS=50
        2 FILES=20
        3 DEVICE=C:\$LDISK.SYS 2
        4 DEVICE=D:\DOS\SYS\ANSI.SYS
        5 DEVICE=D:\DOS\SYS\$PRN24E.SYS
        6 DEVICE=C:\ATOK6IB.SYS
        7 DEVICE=C:\ATOK6IA.SYS /D=C /N=ATOK.DIC /R=0 /M=0 /T=1
                                                            /S=1 /E=1 /B=0 /C=2
        8 SHELL=C:\COMMAND.COM /P /E:512

         Free area 467,760 bytes

     CONFIG.SYS of Partition2
        1 BUFFERS=20
        2 FILES=30
        3 DEVICE=C:\DOS\$LDISK.SYS 1
        4 DEVICE=C:\DOS\SYS\$BANKMGR.SYS
        5 DEVICE=C:\DOS\SYS\$MKKCVT0.SYS /B
        6 DEVICE=C:\EM5250J.SYS
        7 DEVICE=C:\DOS\SYS\$CLOCK.SYS
        8 DEVICE=C:\DOS\SYS\$PRN24E.SYS
        9 DEVICE=C:\DOS\SYS\ANSI.SYS
      10 SHELL =c:\COMMAND.COM /P /E:2048

         Free area 489,248 bytes

    CONFIG.SYS of each partition is the above-mentioned contents.
    Since the version is old, there are HMA and no UMB.
    However, since Kanji ROM is built in, there is free area very well.

    I want to explain a driver peculiar to KDOS and JDOS in this.
$LDISK.SYS It is a driver for making a logical partition recognize.
The partition of the number specified back is recognized
as a drive.
It starts with the 2nd partition and a setup when it is
$LDISK.SYS 1, the 1st partition is recognized as a D drive.
$BANKMGR.SYS
 It is a driver for using a Memory Bank.
The Memory Bank remained to JDOS Ver.4.
$MKKCVT0.SYS
 It is a driver for multiple-clauses conversion.
It comes to use Memory Bank with a /B switch.
EM5250J.SYS
 It is a driver for using a 5250PC.
$CLOCK.SYS
 It is the driver of a time display.
The present time is displayed on the screen lower right.
$PRN24E.SYS
 It is a driver for 24 dot printers of the IBM system.

Page Top
Index